to Automotive MSDS Listings product sheet for Automatic Transmission Fluid Type A
Material Safety Data Sheet - Automatic Transmission Fluid Type A
Product Identification
EDP Number: 184732
Product Name: Automatic Transmission Fluid Type A
DOT Hazard: Not Hazardous
DOT ShipName: Hydrotreated Petroleum Distillates
Physical Data
Boil Point Freeze Point Gravity Vapor Pressure Vapor Density Evap Rate % Volatile Solubility
340 F N/A N/A N/A > Air N/A Nil N/A
Odor and Appearance: Red Liquid with Petroleum Odor
Ingedients
Material Name Percentage TLV Hazard CAS Number
Hydrotreated Light Naphthenic Blend 5mg/m3(mist) Irritant, Flammable 64742-53-6
Hydrotreated Heavy Naphthenic Blend 5mg/m3(mist) Irritant, Flammable 64742-52-5
Fire and Explosion Hazard Data
Flash Point LEL UEL
340 F, 171 C N/A N/A
Extinguishing Media Water, Foam, Carbon Monoxide and Dry Chemical
Unusual Fire & Explosion Hazards Water steam may spread fire. Direct water spray or foam may cause frothing and spattering. Use water to cool fire-exposed containers and to protect personnel. If a leak or spill has not ignited, use water spray to disperse vapors and to flush spills away from exposure.
Health Hazard Data
Acute Effects N/A
Swallowing May cause nausea, vomiting and diarrhea. Small amounts of this product, if aspirated into the lungs, may cause mild to severe pulmonary injury, possibly death.
Inhalation Inhalation of oil mists or fumes can cause irritation fo the nose, throat and upper respiratory tract. Repeated and prolonged overexposure to oil mist may result in droplet deposition, oil granuloma formation, inflammation and increase incidence of infection.
Skin Contact May cause irritation or dermatitis with prolonged and/or repeated exposure.
Eye Contact May cause irritation.
Chronic Effects N/A
Other Hazards None Known
Emergency First Aid Procedures
Swallowing Do not induce vomiting. Seek medical attention immediately.
Inhalation Remove to fresh air. If not breathing begin CPR. If symptoms persist, seek medical attention immediately.
SkinContact Wash effected area immediately with soap and water. Remove contaminated clothing and wash before re-use. Seek medical attention immediately if skin disorder develops.
Eye Contact Flush eye with large amounts of water for 15 minutes, lifting upper and lower lids periodically. Seek medical attention immediately if eye irritation persists.
Primary N/A
Note to Physician Product is 100% petroleum distillate and/or residual oil blend. The product is stable, non-corrosive with no danger of hazardous polymerization.
Reactivity Data
Stablility Stable
Conditions to Avoid Sources of heat, open flames and strong oxidizing agents. Do not pressurize, cut, weld, braze, solder, drill, grind empty containers as they retain product residue.
Materails to Avoid Strong oxidizing agents such as peroxides, chlorine and strong acids.
Hazardous Decom Prod May cause fumes, smoke, sulfur dioxide, oxides of zinc, boron, magnesium, calcium, phosphorus, carbon monoxide, and other low molecular weight hydrocarbons.
Hazardous Polymerization No
Additional Cond to Avoid Sources of heat, sparks and open flames.
Spill or Leak Procedures
Steps if spilled Ventilate the area. Remove any sources of ignition. Absorb with inert absorbent such as clay, sand or diatornaceous earth, commercial absorbents, or recover using pumps.
Waste Disposal Method Dispose of in accordance with all local, state and federal regulations.
Special Protection Information
Respiratory Protection If mist is generated from heating or spraying, use approved organic vapor respirator for oil mist.
Ventilation Use with adequate ventilation
Impervious Gloves Neoprene Gloves
Other PPE Apron, goggles and full face shield when bulk handling
Special Precautions
Storage & Handling Precautions Do not store this material in open or unlabeled containers. Do not store near heat sparks, open flame or strong oxidizing agents.
Other Precautions Wearing contact lenses when handling in bulk is inadvisable. Keep away from children and animals.
HMIS Ratings
Health 1
Flammability 2
Reactivity 1
Personal Protective Equipment D
Prepared By: JOEL POCHRON
TECHNICAL DIRECTOR
MALCO PRODUCTS, INC.
36l FAIRVIEW AVE P O BOX 892
BARBERTON OHIO 44203
330-753-0361 OR 800-253-2526
These numbers are available days, nights, weekends and holidays.
Last Updated 10/14/04
THE INFORMATION CONTAINED HEREIN IS BASED ON DATA CONSIDERED ACCURATE. HOWEVER, NO WARRANTY IS EXPRESSED OR IMPLIED REGARDING THE ACCURACY OF THIS DATA OR THE RESULTS TO BE OBTAINED FROM THE USE THEREOF. VENDOR ASSUMES NO RESPONSIBILITY FOR INJURY TO VENDEE OR THIRD PERSONS PROXIMATELY CAUSED BY THE MATERIALS IF REASONABLE SAFETY PROCEDURES ARE NOT ADHERED TO AS STIPULATED IN THE DATA SHEET. ADDITIONALLY, VENDOR ASSUMES NO RESPONSIBILITY FOR INJURY TO VENDEE OR THIRD PERSONS PROXIMATELY CAUSED BY ABNORMAL USE OF THE MATERIAL, EVEN IF REASONABLE SAFETY PROCEDURES ARE FOLLOWED. FURTHERMORE, VENDEE ASSUMES THE RISK IN HIS USE OF THE MATERIAL.