Notes, Tech Drawings And other Things
All Pics Link to larger Images
All DWG Links Bring Up AutoDesk Mechanical desktop version 5 Drawings
CAUTION: May not work with some NETSCAPE aplications.
PAGE 2
back home

           Initial Concept Sketch

            Refined Concept sketch

2/12/01: work on notebook.  insert images

2/15/01 : Design Mechanical model

     Click to enlarge 
DWG

2/26/01:  Continue work on mechanical model E-notebook

2/26  add gear train to model
 
 

Add the concept of a small spring to lift wires of the blade (purple)  Blades are shown in yellow on the wheel and red on the base
DWG

Refined blade and adjusting slots (note hole in the slots to allow for a bolt from the back.)


DWG
DWG
Changed Idea on blades from very tiny pieces to a few large blade assemblies
Pros: easier to repair manufacture; sharpening, tempering
- cons: lose some adjustment.
Concept Drawing
There are three striping blades and one cutting blade pictured but any combination is possible
 


DWG


 
 

Added new concept for the springs using the same concept as the blade assembly
DWG
 

 Concept sketch for assembly

DWG File

DESIGN PROBLEM
clearance for the location tube does not allow for enough support for the blades;  current design will collapse under pressure on blades


.DWG
SOLUTION
air tube in the center can be removed before or after the strip process
 
 
 
 
 
 

GO TO PAGE 3
back to top